Industry 4.0

■ REP Net 4.0 fits into Industry 4.0 and provides

• Cycle traceability (set value, measured value, compound, operator, SPC calculation)
• Mould settings transfer and centralizing
• Help for production management, workshop modelling

Take a look at Repnet 4.0 in detail!

■ Simplified web interface for the real time analysis and supervision of the workshop status and its production.

■ Allows remote connection to the press screen, remote control of the HMI and software update (via TeamViewer).

Can be used by the After Sales Department from REP for remote assistance or by the customer for remote assistance between different plants.

• • • • • • • • • 

■ Gateway for the safe communication used to check the network connection of all presses, including those of previous generations, since G6 or retrofitted machines.

• • • • • • • • • 

 ■ Email alerts to be informed in real time about the workshop situation and to ensure optimized responsiveness.

• • • • • • • • • 

■ Bar code or QR code reader to make sure the correct compound is used.
Records the batch number or operator code and store it with the REP Net 4.0 cycle.

• • • • • • • • • 

■ Allows to export via USB key the parameters and data associated with the injection molding process (screen shots, mould parameters, fault lists, etc.).

• • • • • • • • • 

■ Connects the press to an automation system (using Euromap 67 protocol).

• • • • • • • • • 

■ Measures the instantaneous consumption of presses and records the energy per cycle, per part, per hour, per day or per production.
Traceability linked with REP Net 4.0.

• • • • • • • • • 

■ Modelling of the production cost and calculation of the cost price of a part produced.

Possible simulation of several scenarios to hold all keys and choose the best solution.

Ask us for your free download !

• • • • • • • • • 

■ Predictive maintenance system:
• Monitoring of internal parameters of the press
• Systems use intensity information
• Detection of wear and variations
• Anticipation and targeting of the maintenance

• • • • • • • • •

■ The whole machine documentation is available and accessible directly on the press HMI.

• • • • • • • • • 

■ Free programming of the specific cycles by the user.

• • • • • • • • • 

■ The pdf documents are available and accessible on the press HMI. (instructions, mold drawing, pictures, mold assembly procedure, …)

Documents linked to the mold can be transferred via REP Net 4.0 or using a USB stick.